products » track-rigging » rig-i-flex-140-series-track »

RIG-I-FLEX® 140 Series Track

ADC RIG-I-FLEX 140 curtain track is a versatile I-beam track system which has been engineered for both curved (ADC Model 140) and straight (ADC Model 141) cord operated systems as well as for "walk-along" (ADC Model 142) systems. It was designed for medium weight curtains on stages and TV studios and for enclosing areas in industrial plants. Overall track length should not exceed 60' for split draws (bi-parts) or 40' for one-way draws.

ADC Model 140 utilizes spindles and idler brackets (Not included in CWANA track pricing) for guiding the operating cord along the curved areas. The track can be curved on-the-job or at the factory (optional) to a minimum 2’ radius.

This track cannot be used for reverse curved or serpentine layouts.

RIG-I-FLEX® 140 Series Track

GENERAL SPECIFICATIONS:
•Approximate max curtain weight per foot of track: 15 lbs.
•Maximum track length (Bi-Part setup): 60 feet.
•Carrier spacing: 12 inches.
•Approximate curtain stacking space per foot of track: 1.8 inches
(standard layout, based on average track length for individual track models)
•Minimum radius for curved sections: 24 inches (2 feet).
•Approximate assembly shipping weight: 2 lbs/linear foot.

ADC manually operated cord-drawn curved tracks require more effort than straight tracks. Therefore, motorized systems should be used, especially where sharp curves are involved.

NOTE: For more satisfactory track operation, the track must be solidly anchored to an overhead structure surface mounted with ceiling clamps. Pipe backbones are recommended for suspended systems.

IMPORTANT: A scaled drawing or template must accompany each inquiry or order for ADC model 140 RIG-I-FLEX® curved tracks. Only in this way can the required number of spindles and idler brackets be quoted or supplied. When ordering, advice whether the track is to be ceiling-mounted, suspended or wall mounted.

The ADC 140 series is also available with a black finish at additional cost (240).

Related parts and components for the 140 curtain track system are listed below, including pricing and specifications.

For more details on other models within the ADC 140 series or for walk-along operation, click on the links listed on the left column below.

More about RIG-I-FLEX® 140 Track:

RIG-I-FLEX® 140-R Curtain Track
ADC Model 140-R is identical to Model 140 except that No. 4237 Single Carriers and No. 1438 Master Carriers are used instead of No. 4201 and No. 1402. ADC RIG-I-FLEX is a versatile I-beam track which has been engineered for both curved (Model 140) and straight (Model 141) cord operated systems a...
RIG-I-FLEX® 141 Curtain Track
ADC Model 141 is identical to Model 140 except that it is ENTIRELY STRAIGHT IN LAYOUT and No. 1403-B Live-End Pulley is used instead of No. 1403. ADC Model 141 is equipped with No. 4201 Single Carriers and No. 1402 Master Carriers. Also available with a black finish at additional cost (241). Plea...
RIG-I-FLEX® 141R Curtain Track
ADC Model 141R is identical to Model 140 except that it is ENTIRELY STRAIGHT IN LAYOUT and No. 1403-B Live-End Pulley is used instead of No. 1403. ADC Model 141-R is equipped with No. 4237 Single Carriers and No. 1438 Master Carriers. Also available with a black finish at additional cost (24...
RIG-I-FLEX® 142 Curtain Track
ADC RIG-I-Flex Model 142 is recommended for stage and TV studio cyclorama installations where it is necessary that the operator walk the curtain to its opened and closed positions. The track is curved on-the-job and can be bent to a minimum radius of 2’ (layout dependent). No cord or pulleys are ...
RIG-I-FLEX® 142-R Curtain Track
ADC RIG-I-Flex Model 142R is recommended for lighter duty stage and TV studio cyclorama installations where it is necessary that the operator walk the curtain to its opened and closed positions. The track is curved on-the-job and can be bent to a minimum radius of 2’ (layout dependent). No cord o...

RIG-I-FLEX® 140 Track related Parts:

1400 Curtain Track Channel 1400 Curtain Track Channel
I-Beam type curtain track channel made from 11 gauge extruded aluminum, mill-...
$11.26  $9.01
4201 Single Carrier4201 Single Carrier
Carrier spacing: 12". Plated steel block supported from 2 nylon-tired ball-be...
$16.13  $12.90
1402 Master Carrier1402 Master Carrier
Pivoting block assembly constructed of plated steel supported from 4 nylon ti...
$99.51  $79.61
1403 Live End Pulley1403 Live End Pulley
Painted steel construction, equipped with 2 oil-impregnated sleeve-bearing n...
$84.26  $67.41
1404 Dead End Pulley1404 Dead End Pulley
Painted steel construction, equipped with 1 oil-impregnated sleeve-bearing ny...
$65.69  $52.55
1404A Dead End Pulley1404A Dead End Pulley
Dead end pulley used with one-way draw applications. Painted steel constructi...
$64.72  $51.78
1403F Flying Live End Pulley1403F Flying Live End Pulley
Used when track is operated by a flying type machine. Pulley routes operating...
$94.90  $75.92
1403A Center Take Off Live End Pulley1403A Center Take Off Live End Pulley
Used when the operating lines need to be routed perpendicular to the track. ...
$92.20  $73.76
4224 Splicing Clamp4224 Splicing Clamp
Lock plate for joining track sections assuring proper vertical and horizontal...
$10.15  $8.12
4208 Hanging Clamp4208 Hanging Clamp
Recommended spacing: 4' with additional units at curves and in stack areas. ...
$3.23  $2.58
1423 Ceiling Clamp1423 Ceiling Clamp
Recommended spacing: 5' with additional units added at curves and in stack ar...
$13.59  $10.87
1407 Lap Clamp1407 Lap Clamp
For securing double-sectioned track at center overlap. Approximately: 4" wid...
$21.70  $17.36
1407A Lap Clamp1407A Lap Clamp
For use with continuously curved track systems. Provides wider track spacing ...
$23.85  $19.08
1409 End Stop1409 End Stop
Prevents carriers from moving beyond selected position in track. Used also as...
$17.11  $13.69
1408A Threaded Rod Hanger1408A Threaded Rod Hanger
Used with Model 4208 Hanging Clamp (not included). Provides a 3/8" hole paral...
$4.00  $3.20
1483 Double Track Wall Bracket1483 Double Track Wall Bracket
Used to mount 2 tracks, parallel with each other, to side walls. Standard tra...
$99.39  $79.51
1458 Spindle A1458 Spindle A
Consists of steel tubing equipped with 2 ball-bearings. Used for guiding cord...
$49.40  $39.52
1459 Spindle B1459 Spindle B
Same as No. 1458 but without ball-bearing wheel. Always placed on Dead-End ha...
$32.35  $25.88
1460 Idler Bracket1460 Idler Bracket
Bracket includes ball-bearing wheel for guiding cord around curve. Always pl...
$26.55  $21.24
1460A Idler1460A Idler
Used only at the overlap for track systems with a continuous radius. Availab...
$58.94  $47.15
2865 Tension Floor Pulley2865 Tension Floor Pulley
Equipped with 1 oil-impregnated sleeve bearing nylon wheel. Tension spring p...
$70.64  $56.51
1728 Sash Cord1728 Sash Cord
Synthetic center and stretch-resistant. For manually-operated tracks. Frequ...
$0.82  $0.66
3529 Cable3529 Cable
Wire center with woven polyester cover. Available on 500 ft and 1000 ft spool...
$0.93  $0.74
1713 Pipe Clamp1713 Pipe Clamp
For 1” I.D. Schedule 40 pipe Weight: 1 pr. - 5.5 oz. Available in black f...
$10.27  $8.22
1714 Pipe Clamp1714 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black...
$10.85  $8.68
1715 Pipe Clamp1715 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black...
$11.88  $9.50
BT1 Bending ToolBT1 Bending Tool
BT-1 I-beam track bending tool for use with Models 1300, 1400 & 4200 tracks. ...
$446.84  $357.47
BT2 Bending ToolBT2 Bending Tool
Economical I-beam track bending tool that can be fixed to floor or workbench....
$180.08  $144.06
Pipe BattensPipe Battens
Pipe battens are recommended for supporting all suspended track systems, espe...
$6.00  $4.80
TC1 Trim Chain (3 links)TC1 Trim Chain (3 links)
Trim chain is used for leveling purposes between the carrier and the top of t...
$1.27  $1.02
TC2 Trim Chain (5 links)TC2 Trim Chain (5 links)
Trim chain is used for leveling purposes between the carrier and the top of t...
$1.54  $1.23
MB3 Mule BlockMB3 Mule Block
MB-3 is used with Nos. 1403-A Center Take-Off Live End Pulleys. Mule Blocks ...
$91.59  $73.27
2914 Silver Service In-Line Machine. 1/2 H.P.2914 Silver Service In-Line Machine. 1/2 H.P.
This machine is specifically designed to work with No. 140 Series tracks, and...
$5,550.63  $4,440.50
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated t...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
New ADC curtain track wall bracket which can be used to wall mount the entire...
$70.65  $60.05
MTSM Mega-Track Hanger, ShortMTSM Mega-Track Hanger, Short
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe...
$20.00  $17.00
MTLM Mega-Track hanger, LongMTLM Mega-Track hanger, Long
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe...
$20.00  $17.00
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business