products » track-rigging » rig-i-flex-140-series-track » rig-i-flex-140-r-curtain-track »

RIG-I-FLEX® 140-R Curtain Track

ADC Model 140-R is identical to Model 140 except that No. 4237 Single Carriers and No. 1438 Master Carriers are used instead of No. 4201 and No. 1402.
ADC RIG-I-FLEX is a versatile I-beam track which has been engineered for both curved (Model 140) and straight (Model 141) cord operated systems as well as for "walk-along"(Model 142) systems. It was designed for medium weight curtains on stages and TV studios and for enclosing areas in industrial plants. Overall track length should not exceed 60' for split draws (bi-parts) or 40' for one-way draws.

Model 140-R by Automatic Devices utilizes spindles and idler brackets (Not included in CWANA track pricing) for guiding the operating cord along the curved areas. The track can be curved on-the-job or at the factory (optional) to a minimum 2’ radius.

This track cannot be used for reverse curved or serpentine layouts.

Also available with a black finish at additional cost (240-R).

RIG-I-FLEX® 140-R Curtain Track

Manually operated cord-drawn curved tracks require more effort than straight tracks. Therefore, motorized systems should be used, especially where sharp curves are involved.

NOTE: For more satisfactory track operation, the track must be solidly anchored to an overhead structure surface mounted with ceiling clamps. Pipe backbones are recommended for suspended systems.

IMPORTANT: A scaled drawing or template must accompany each inquiry or order for ADC Model 140-R RIG-I-FLEX® curved tracks. Only in this way can the required number of spindles and idler brackets be quoted or supplied. When ordering, advice whether the track is to be ceiling-mounted, suspended or wall mounted.

Please click on the links below to see detailed information on parts and components related to 140-R track.

RIG-I-FLEX® 140-R Curtain Track Parts:

1400 Curtain Track Channel 1400 Curtain Track Channel
I-Beam type curtain track channel made from 11 gauge extruded aluminum, mill-finish or anodized black finish [BL Models]. Obtainable in unspliced lengths up to 20'. May be curved on-the-job to rec...
$11.26  $9.01
4237 Single Carrier4237 Single Carrier
Carrier spacing: 12". Same construction as No. 4201 except equipped with 2 solid nylon wheels. Used on Model 140-R, 141-R and 142-R. Carrier width: Approximately 1-3/8". Weight: 1 - 3 oz. Avail...
$14.76  $11.81
1403 Live End Pulley1403 Live End Pulley
Painted steel construction, equipped with 2 oil-impregnated sleeve-bearing nylon wheels. Anchored to track end, no drilling required. Pulley width: Approximately 7". Weight: 1 - 1 lb. 12 oz.
$84.26  $67.41
1404 Dead End Pulley1404 Dead End Pulley
Painted steel construction, equipped with 1 oil-impregnated sleeve-bearing nylon wheel. Anchors to track end. No drilling required. Pulley width: Approximately 5-1/4". Weight: 1 - 1 lb. 1 oz.
$65.69  $52.55
1404A Dead End Pulley1404A Dead End Pulley
Dead end pulley used with one-way draw applications. Painted steel construction, equipped with 1 oil-impregnated sleeve-bearing nylon wheel. Approximately: 4" long x 4" high x 2-13/16" wide. We...
$64.72  $51.78
1403F Flying Live End Pulley1403F Flying Live End Pulley
Used when track is operated by a flying type machine. Pulley routes operating lines 180 degrees parallel and above track, to the track-mounted flying machine. Approximately: 6-1/2" long x 7" high...
$94.90  $75.92
1403A Center Take Off Live End Pulley1403A Center Take Off Live End Pulley
Used when the operating lines need to be routed perpendicular to the track. NOTE: You must order an additional 1404 Dead-End pulley and MB-3 mule block when using this device. Additional pulleys m...
$92.20  $73.76
4224 Splicing Clamp4224 Splicing Clamp
Lock plate for joining track sections assuring proper vertical and horizontal track alignment. Track must be straight at splices. Approximately: 8-1/4" long x 1" wide. Weight: 1 pr. - 11 oz. Av...
$10.15  $8.12
4208 Hanging Clamp4208 Hanging Clamp
Recommended spacing: 4' with additional units at curves and in stack areas. Pipe batten recommended for suspended curved tracks. Sold in pairs. Weight: 1 pr. - 2-1/2 oz. Available in black fini...
$3.23  $2.58
1423 Ceiling Clamp1423 Ceiling Clamp
Recommended spacing: 5' with additional units added at curves and in stack areas. For use on ceiling-mounted installations. Adjustable to any location. Top plate can be mounted first, with the tra...
$13.59  $10.87
1407 Lap Clamp1407 Lap Clamp
For securing double-sectioned track at center overlap. Approximately: 4" wide x 1-1/2" long x 3/8" deep. Weight: 1 - 7 oz.
$21.70  $17.36
1407A Lap Clamp1407A Lap Clamp
For use with continuously curved track systems. Provides wider track spacing in the overlap. Approximately: 6" wide x 1-1/2" long x 3/8" deep. Weight: 1 – 7 oz.
$23.85  $19.08
1409 End Stop1409 End Stop
Prevents carriers from moving beyond selected position in track. Used also as cord guide. Approximately 1-3/8". Weight: 1 - 2 oz. NOTE: Cannot be used with Rotodrapers®. Use bolt and nut thro...
$17.11  $13.69
1408A Threaded Rod Hanger1408A Threaded Rod Hanger
Used with Model 4208 Hanging Clamp (not included). Provides a 3/8" hole parallel with the ceiling (perpendicular to the mounting hole of the 4208). Approximately: 1-1/4" x 1-3/4" x 2-3/8". For us...
$4.00  $3.20
1483 Double Track Wall Bracket1483 Double Track Wall Bracket
Used to mount 2 tracks, parallel with each other, to side walls. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Projection of track closest t...
$99.39  $79.51
1458 Spindle A1458 Spindle A
Consists of steel tubing equipped with 2 ball-bearings. Used for guiding cord around curves. Also has ball-bearing wheel for guiding return cord. Always placed on Live-End half of track on inside...
$49.40  $39.52
1459 Spindle B1459 Spindle B
Same as No. 1458 but without ball-bearing wheel. Always placed on Dead-End half of track on inside of curve. Minimum pocket width to accommodate spindles and idlers: Approximately 8". Weight: 1 -...
$32.35  $25.88
1460 Idler Bracket1460 Idler Bracket
Bracket includes ball-bearing wheel for guiding cord around curve. Always placed on the Dead-End half of the track on outside of curve. Weight: 1 - 10 oz. Available in black finish at additional...
$26.55  $21.24
1460A Idler1460A Idler
Used only at the overlap for track systems with a continuous radius. Available in black finish at additional cost (No. 1460-ABL). NOTE: Not included with CWANA systems. Must be ordered separately.
$58.94  $47.15
2865 Tension Floor Pulley2865 Tension Floor Pulley
Equipped with 1 oil-impregnated sleeve bearing nylon wheel. Tension spring provides continuous cord tension. Can be either wall or floor mounted. Spring loaded latch maintains wheel in upper most ...
$70.64  $56.51
1728 Sash Cord1728 Sash Cord
Synthetic center and stretch-resistant. For manually-operated tracks. Frequently used with our 170 Besteel series curtain track system. 1/4” (No. 8) Weight: 100’ - 2 lbs. 4 oz.
$0.82  $0.66
3529 Cable3529 Cable
Wire center with woven polyester cover. Available on 500 ft and 1000 ft spools. Used with drum-drive curtain machines and most In-Line curtain machines. 3/16” (No. 6) Color: Black. Weight: 100’...
$0.93  $0.74
1713 Pipe Clamp1713 Pipe Clamp
For 1” I.D. Schedule 40 pipe Weight: 1 pr. - 5.5 oz. Available in black finish at additional cost (No. 1713BL).
$10.27  $8.22
1714 Pipe Clamp1714 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1714BL).
$10.85  $8.68
1715 Pipe Clamp1715 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1715BL).
$11.88  $9.50
BT1 Bending ToolBT1 Bending Tool
BT-1 I-beam track bending tool for use with Models 1300, 1400 & 4200 tracks. Approximate dimensions: 48" long x 15" wide x 9" high. Weight: 1 - 19 lbs. 4 oz.
$446.84  $357.47
BT2 Bending ToolBT2 Bending Tool
Economical I-beam track bending tool that can be fixed to floor or workbench. track is formed by moving and curving it around BT-2 Bending Tool. For use with Models 1300 & 1400 only. Approximatel...
$180.08  $144.06
TC1 Trim Chain (3 links)TC1 Trim Chain (3 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Three links provide 3” of curtain height adjustment on carriers where chain is not normally supplied. Other...
$1.27  $1.02
TC2 Trim Chain (5 links)TC2 Trim Chain (5 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Five links provide 5” of curtain height adjustment on carriers where chain is not normally supplied. Other ...
$1.54  $1.23
MB3 Mule BlockMB3 Mule Block
MB-3 is used with Nos. 1403-A Center Take-Off Live End Pulleys. Mule Blocks are a means of allowing lines to pass over the edge of a sill without rubbing or binding. Dimensions: 5” long x 4” wide...
$91.59  $73.27
2914 Silver Service In-Line Machine. 1/2 H.P.2914 Silver Service In-Line Machine. 1/2 H.P.
This machine is specifically designed to work with No. 140 Series tracks, and for projects requiring the curtain machine to be located off of the finished floor. This model machine is designed to a...
$5,550.63  $4,440.50
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated threaded rod. The bracket is fabricated from hardened steel and has centered hole designed to accept 1?2" threaded rod. T...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
New ADC curtain track wall bracket which can be used to wall mount the entire line of ADC curtain track systems. A slotted mounting surface allows the tracks to be easily adjusted from 4" to 12" f...
$70.65  $60.05
MTSM Mega-Track Hanger, ShortMTSM Mega-Track Hanger, Short
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the trac...
$20.00  $17.00
MTLM Mega-Track hanger, LongMTLM Mega-Track hanger, Long
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset ...
$20.00  $17.00
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business