products » track-rigging » rig-i-flex-140-series-track » rig-i-flex-141-curtain-track »

RIG-I-FLEX® 141 Curtain Track

ADC Model 141 is identical to Model 140 except that it is ENTIRELY STRAIGHT IN LAYOUT and No. 1403-B Live-End Pulley is used instead of No. 1403. ADC Model 141 is equipped with No. 4201 Single Carriers and No. 1402 Master Carriers. Also available with a black finish at additional cost (241). Please click on the links below to see the parts and components related to these tracks.


RIG-I-FLEX® 141 Curtain Track

Please click on the links below to see the parts and components related to these tracks.

RIG-I-FLEX® 141 Curtain Track Parts:

1400 Curtain Track Channel 1400 Curtain Track Channel
I-Beam type curtain track channel made from 11 gauge extruded aluminum, mill-finish or anodized black finish [BL Models]. Obtainable in unspliced lengths up to 20'. May be curved on-the-job to rec...
$11.26  $9.01
4201 Single Carrier4201 Single Carrier
Carrier spacing: 12". Plated steel block supported from 2 nylon-tired ball-bearing wheels. Snap-on nylon spacers reduce noise and friction. Width: Approximately 1-3/8". Weight: 1 - 4 oz. Availab...
$16.13  $12.90
1403B Live End Pulley1403B Live End Pulley
Used with straight track systems (Models 141 and 141-R) only. Dual wheeled pulley used above the floor pulley to route the operating cords/cables from the track elevation to the floor pulley. T...
$120.10  $96.08
1404 Dead End Pulley1404 Dead End Pulley
Painted steel construction, equipped with 1 oil-impregnated sleeve-bearing nylon wheel. Anchors to track end. No drilling required. Pulley width: Approximately 5-1/4". Weight: 1 - 1 lb. 1 oz.
$65.69  $52.55
1403A Center Take Off Live End Pulley1403A Center Take Off Live End Pulley
Used when the operating lines need to be routed perpendicular to the track. NOTE: You must order an additional 1404 Dead-End pulley and MB-3 mule block when using this device. Additional pulleys m...
$92.20  $73.76
4224 Splicing Clamp4224 Splicing Clamp
Lock plate for joining track sections assuring proper vertical and horizontal track alignment. Track must be straight at splices. Approximately: 8-1/4" long x 1" wide. Weight: 1 pr. - 11 oz. Av...
$10.15  $8.12
4208 Hanging Clamp4208 Hanging Clamp
Recommended spacing: 4' with additional units at curves and in stack areas. Pipe batten recommended for suspended curved tracks. Sold in pairs. Weight: 1 pr. - 2-1/2 oz. Available in black fini...
$3.23  $2.58
1423 Ceiling Clamp1423 Ceiling Clamp
Recommended spacing: 5' with additional units added at curves and in stack areas. For use on ceiling-mounted installations. Adjustable to any location. Top plate can be mounted first, with the tra...
$13.59  $10.87
1407 Lap Clamp1407 Lap Clamp
For securing double-sectioned track at center overlap. Approximately: 4" wide x 1-1/2" long x 3/8" deep. Weight: 1 - 7 oz.
$21.70  $17.36
1407A Lap Clamp1407A Lap Clamp
For use with continuously curved track systems. Provides wider track spacing in the overlap. Approximately: 6" wide x 1-1/2" long x 3/8" deep. Weight: 1 – 7 oz.
$23.85  $19.08
1409 End Stop1409 End Stop
Prevents carriers from moving beyond selected position in track. Used also as cord guide. Approximately 1-3/8". Weight: 1 - 2 oz. NOTE: Cannot be used with Rotodrapers®. Use bolt and nut thro...
$17.11  $13.69
1408A Threaded Rod Hanger1408A Threaded Rod Hanger
Used with Model 4208 Hanging Clamp (not included). Provides a 3/8" hole parallel with the ceiling (perpendicular to the mounting hole of the 4208). Approximately: 1-1/4" x 1-3/4" x 2-3/8". For us...
$4.00  $3.20
1483 Double Track Wall Bracket1483 Double Track Wall Bracket
Used to mount 2 tracks, parallel with each other, to side walls. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Projection of track closest t...
$99.39  $79.51
2865 Tension Floor Pulley2865 Tension Floor Pulley
Equipped with 1 oil-impregnated sleeve bearing nylon wheel. Tension spring provides continuous cord tension. Can be either wall or floor mounted. Spring loaded latch maintains wheel in upper most ...
$70.64  $56.51
1728 Sash Cord1728 Sash Cord
Synthetic center and stretch-resistant. For manually-operated tracks. Frequently used with our 170 Besteel series curtain track system. 1/4” (No. 8) Weight: 100’ - 2 lbs. 4 oz.
$0.82  $0.66
3529 Cable3529 Cable
Wire center with woven polyester cover. Available on 500 ft and 1000 ft spools. Used with drum-drive curtain machines and most In-Line curtain machines. 3/16” (No. 6) Color: Black. Weight: 100’...
$0.93  $0.74
1713 Pipe Clamp1713 Pipe Clamp
For 1” I.D. Schedule 40 pipe Weight: 1 pr. - 5.5 oz. Available in black finish at additional cost (No. 1713BL).
$10.27  $8.22
1714 Pipe Clamp1714 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1714BL).
$10.85  $8.68
1715 Pipe Clamp1715 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1715BL).
$11.88  $9.50
TC1 Trim Chain (3 links)TC1 Trim Chain (3 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Three links provide 3” of curtain height adjustment on carriers where chain is not normally supplied. Other...
$1.27  $1.02
TC2 Trim Chain (5 links)TC2 Trim Chain (5 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Five links provide 5” of curtain height adjustment on carriers where chain is not normally supplied. Other ...
$1.54  $1.23
MB3 Mule BlockMB3 Mule Block
MB-3 is used with Nos. 1403-A Center Take-Off Live End Pulleys. Mule Blocks are a means of allowing lines to pass over the edge of a sill without rubbing or binding. Dimensions: 5” long x 4” wide...
$91.59  $73.27
2914 Silver Service In-Line Machine. 1/2 H.P.2914 Silver Service In-Line Machine. 1/2 H.P.
This machine is specifically designed to work with No. 140 Series tracks, and for projects requiring the curtain machine to be located off of the finished floor. This model machine is designed to a...
$5,550.63  $4,440.50
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated threaded rod. The bracket is fabricated from hardened steel and has centered hole designed to accept 1?2" threaded rod. T...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
New ADC curtain track wall bracket which can be used to wall mount the entire line of ADC curtain track systems. A slotted mounting surface allows the tracks to be easily adjusted from 4" to 12" f...
$70.65  $60.05
MTSM Mega-Track Hanger, ShortMTSM Mega-Track Hanger, Short
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the trac...
$20.00  $17.00
MTLM Mega-Track hanger, LongMTLM Mega-Track hanger, Long
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset ...
$20.00  $17.00
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business