products » track-rigging » rig-i-flex-140-series-track » rig-i-flex-142-curtain-track »

RIG-I-FLEX® 142 Curtain Track

ADC RIG-I-Flex Model 142 is recommended for stage and TV studio cyclorama installations where it is necessary that the operator walk the curtain to its opened and closed positions. The track is curved on-the-job and can be bent to a minimum radius of 2’ (layout dependent). No cord or pulleys are supplied with "walk-along" tracks. Model 4252 Master Carriers are used with the systems.
ADC RIG-I-Flex Model 142-R is identical to Model 142 except that No. 4237 Single Carriers and No. 4253 Master Carriers are used.

Also available with a black finish at additional cost (242 / 242-R).

RIG-I-FLEX® 142 Curtain Track

Please click on the links below to see the parts and components related to these tracks.

RIG-I-FLEX® 142 Curtain Track Parts:

1400 Curtain Track Channel 1400 Curtain Track Channel
I-Beam type curtain track channel made from 11 gauge extruded aluminum, mill-finish or anodized black finish [BL Models]. Obtainable in unspliced lengths up to 20'. May be curved on-the-job to rec...
$11.26  $9.01
4201 Single Carrier4201 Single Carrier
Carrier spacing: 12". Plated steel block supported from 2 nylon-tired ball-bearing wheels. Snap-on nylon spacers reduce noise and friction. Width: Approximately 1-3/8". Weight: 1 - 4 oz. Availab...
$16.13  $12.90
4252 Walk-Along Master Carrier4252 Walk-Along Master Carrier
Used with Models 422 and 142 tracks. Pivoting block assembly constructed of plated steel supported from 4 nylon tired ball-bearing wheels. Snap-on nylon spacers reduce noise and friction. Carrie...
$54.14  $43.31
4253 Walk-Along Master Carrier4253 Walk-Along Master Carrier
Used with Models 422-R and 142-R tracks. Pivoting block assembly constructed of plated steel supported from 4 solid nylon wheels. Snap-on nylon spacers reduce noise and friction. Carrier width: ...
$55.35  $44.28
4224 Splicing Clamp4224 Splicing Clamp
Lock plate for joining track sections assuring proper vertical and horizontal track alignment. Track must be straight at splices. Approximately: 8-1/4" long x 1" wide. Weight: 1 pr. - 11 oz. Av...
$10.15  $8.12
4208 Hanging Clamp4208 Hanging Clamp
Recommended spacing: 4' with additional units at curves and in stack areas. Pipe batten recommended for suspended curved tracks. Sold in pairs. Weight: 1 pr. - 2-1/2 oz. Available in black fini...
$3.23  $2.58
1423 Ceiling Clamp1423 Ceiling Clamp
Recommended spacing: 5' with additional units added at curves and in stack areas. For use on ceiling-mounted installations. Adjustable to any location. Top plate can be mounted first, with the tra...
$13.59  $10.87
1407 Lap Clamp1407 Lap Clamp
For securing double-sectioned track at center overlap. Approximately: 4" wide x 1-1/2" long x 3/8" deep. Weight: 1 - 7 oz.
$21.70  $17.36
1407A Lap Clamp1407A Lap Clamp
For use with continuously curved track systems. Provides wider track spacing in the overlap. Approximately: 6" wide x 1-1/2" long x 3/8" deep. Weight: 1 – 7 oz.
$23.85  $19.08
4209 End Stop4209 End Stop
Identical to 4208 except installed in inverted position at bottom of channel. Used with track Models 142 & 142-R. Weight: 1pr – 2 oz. Available in black finish at additional cost (No. 4209BL). ...
$3.23  $2.58
1408A Threaded Rod Hanger1408A Threaded Rod Hanger
Used with Model 4208 Hanging Clamp (not included). Provides a 3/8" hole parallel with the ceiling (perpendicular to the mounting hole of the 4208). Approximately: 1-1/4" x 1-3/4" x 2-3/8". For us...
$4.00  $3.20
1483 Double Track Wall Bracket1483 Double Track Wall Bracket
Used to mount 2 tracks, parallel with each other, to side walls. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Projection of track closest t...
$99.39  $79.51
1482 Double Track Hanger1482 Double Track Hanger
Used to mount 2 tracks, parallel with each other when the tracks are suspended. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Painted steel...
$32.26  $25.81
1713 Pipe Clamp1713 Pipe Clamp
For 1” I.D. Schedule 40 pipe Weight: 1 pr. - 5.5 oz. Available in black finish at additional cost (No. 1713BL).
$10.27  $8.22
1714 Pipe Clamp1714 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1714BL).
$10.85  $8.68
1715 Pipe Clamp1715 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1715BL).
$11.88  $9.50
BT1 Bending ToolBT1 Bending Tool
BT-1 I-beam track bending tool for use with Models 1300, 1400 & 4200 tracks. Approximate dimensions: 48" long x 15" wide x 9" high. Weight: 1 - 19 lbs. 4 oz.
$446.84  $357.47
BT2 Bending ToolBT2 Bending Tool
Economical I-beam track bending tool that can be fixed to floor or workbench. track is formed by moving and curving it around BT-2 Bending Tool. For use with Models 1300 & 1400 only. Approximatel...
$180.08  $144.06
1478 Suspension Strap1478 Suspension Strap
Used with Model 4208 Hanging Clamp (not included) and pipe clamp (also not included) to attach track to parallel overhead pipe batten. Strap length 4". Weight: 1 – 2 oz. Available in black fin...
$14.07  $11.26
1478A Suspension Strap w/pipe clamp1478A Suspension Strap w/pipe clamp
Used with Model 4208 or 1308 hanging clamp (not included) to attach track to parallel overhead 1 1/2 pipe batten. Strap length 6" from bottom of pipe. Weight: 1 pr. – 2 oz. Available in black f...
$21.24  $16.99
1481 Twist Strap1481 Twist Strap
Used with Model 4208 hanging clamp (not included) and pipe clamp (also not included) to attach track to perpendicular overhead pipe batten. Strap length 4” Weight: 1 – 2 oz. Available in blac...
$21.54  $17.23
1481A Twist Strap1481A Twist Strap
Used with Model 4208 hanging clamp (not included) to attach track to perpendicular overhead pipe batten. Strap length 6" from bottom of pipe. Weight: 1 – 2 oz. Available in black finish at add...
$28.58  $22.86
4251 Scenery Carrier4251 Scenery Carrier
Used to traverse medium weight scenery panels. Normally used in pairs on a single panel. Maximum panel weight (2 carriers per panel) is 30 pounds. Approximately: 4-3/8" long x 4-7/8" high x 1-1/2...
$297.77  $238.22
14 Rotodraper® Pivot Device14 Rotodraper® Pivot Device
Used with 1400 and 4200 track. Brackets formed of 11 gauge steel. Can support 75 lbs. maximum weight. Two Pipe Clamps supplied (clamps for 1" pipe standard). Two No. 400-C Clamps provided for con...
$247.44  $197.95
14A Rotodraper® Pivot Device14A Rotodraper® Pivot Device
1 - 4-1/2 lbs. Used with 1400 and 4200 track. Essentially same as Model 14 except includes ball-type locking device which provides precise 15 degree settings of rotation. Brackets formed of 11 gau...
$317.54  $254.03
TC1 Trim Chain (3 links)TC1 Trim Chain (3 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Three links provide 3” of curtain height adjustment on carriers where chain is not normally supplied. Other...
$1.27  $1.02
TC2 Trim Chain (5 links)TC2 Trim Chain (5 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Five links provide 5” of curtain height adjustment on carriers where chain is not normally supplied. Other ...
$1.54  $1.23
143 Switcher-I® Curtain Track Switch143 Switcher-I® Curtain Track Switch
Standard switching devices (for two-way direction) represent a major development in the effort toward more versatile stage and studio settings. Simply by pulling down on a pendant, the track channe...
$847.57  $678.05
143 MTWS Motorized Two-Way Switch143 MTWS Motorized Two-Way Switch
MOTORIZED TWO-WAY SWITCHES can be used in locations where it is impractical or impossible to use a positioning pole due to extreme height, obstructions, or inaccessibility. Motorized operation is...
$3,148.53  $2,518.82
143CC SWITCHER-I® Track Switcher143CC SWITCHER-I® Track Switcher
Supplementing the line of two-way switching devices, ADC has developed a criss-cross concept in track switching which involves a turntable on which four different switching directions can be effect...
$1,035.52  $828.42
PP1 Positioning PolePP1 Positioning Pole
No. PP-1 Positioning Pole is used to move the two-way switch to another position by simply engaging the pendant and pulling down. It is 8'6" long and can be extended to 16'.
$228.64  $182.91
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated threaded rod. The bracket is fabricated from hardened steel and has centered hole designed to accept 1?2" threaded rod. T...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
New ADC curtain track wall bracket which can be used to wall mount the entire line of ADC curtain track systems. A slotted mounting surface allows the tracks to be easily adjusted from 4" to 12" f...
$70.65  $60.05
MTSM Mega-Track Hanger, ShortMTSM Mega-Track Hanger, Short
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the trac...
$20.00  $17.00
MTLM Mega-Track hanger, LongMTLM Mega-Track hanger, Long
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset ...
$20.00  $17.00
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business