products » track-rigging » silent-steel-280-series-track » silent-steel-283n-curtain-track »

SILENT STEEL® 283N Curtain Track

Super heavy duty track ADC Model 283-N employ No. 2863-A 8" Live End Pulleys, No. 2864-A 8" Dead End Pulleys and No. 2866-A 8" Adjustable Floor Pulleys which combined with the No. 2830 1/2" Sash Cord reduce operating effort on systems with heavy curtains.
Model 283-R Silent Steel track is equipped with No. 2851 Neoprene Ball-Bearing Single Carriers and No. 2852 Neoprene Ball-Bearing Master Carriers. This track system can be used to cover very long runs with heavy multi-layered curtains.

This ADC track model is also available with a black finish (383-N) at additional cost.

SILENT STEEL® 283N Curtain Track

Parts and components related to the ADC 283-N curtain track system are listed below, including pricing and specifications.

SILENT STEEL® 283N Curtain Track Parts:

2800 Curtain Track Channel2800 Curtain Track Channel
Box type curtain track channel made from 14 gauge galvanized steel. (No. 2800-A supplied in 12 gauge aluminum with a black finish) Obtainable in unspliced lengths up to 26'. Holes can be drilled fo...
$19.29  $15.43
2851 Nylon Ball-Bearing Single Carrier2851 Nylon Ball-Bearing Single Carrier
Block constructed of plated steel supported from 2 nylon-tired ball-bearing wheels. Provides longer service and easier operation. Used with Model 282 & 283-N. Approximately: 9-1/4” high from bot...
$40.45  $32.36
2852 Nylon Ball-Bearing Master Carrier2852 Nylon Ball-Bearing Master Carrier
Block constructed of plated steel supported from 4 sealed and greased nylon tired ball-bearing wheels. Used with Model 282 & 283-N. Approximately: 9-1/4” high from bottom of track to bottom of tri...
$101.50  $81.20
2808 Hanging Clamp2808 Hanging Clamp
Two piece + assembly fastener. Adjustable to any location on the track. Recommended spacing: 7 ft. Steel, chain or cable suggested for track suspension. Pipe battens recommended for long and heavy...
$8.64  $6.91
2809 End Stop2809 End Stop
Prevents carriers from moving beyond selected position in track. Weight: 1 - 6.4 oz. Available in black finish at additional cost (No. 2809BL). NOTE: Cannot be used with Rotodrapers®. Use ...
$8.51  $6.81
2807  Lap Clamp2807 Lap Clamp
For securing bi-parting tracks at the center overlap. NOTE: For use with suspended track systems only. Weight: 1 - 1 lb. 8 oz. Available in black finish at additional cost (No. 2807BL).
$12.75  $10.20
2824 Suspended Splicing Clamp2824 Suspended Splicing Clamp
Two piece + assembly fasteners, 11 gauge steel clamp for joining track sections assuring proper alignment of track channels. Approximately 12” long x 2-3/4” wide x 5-1/2” high. NOTE: For suspend...
$87.45  $69.96
2824A Ceiling Splicing Clamp2824A Ceiling Splicing Clamp
Two piece 11 gauge steel clamp for joining track sections assuring proper alignment of track channels. Approximately: 12” long x 7/8” wide x 2-13/16” high. NOTE: For ceiling mounted tracks only. ...
$91.46  $73.17
CPS-1 Center Pipe SupportCPS-1 Center Pipe Support
To facilitate the clamping of steel track channel to a single pipe batten. The Center Pipe Support is placed at the overlap and the two lap clamps are used in the normal manner. Weight: 1 pr - 1...
$17.17  $13.74
2866A Adjustable Floor Pulley2866A Adjustable Floor Pulley
Equipped with one ball-bearing 8” diameter nylatron wheel. Wheel locks in place via threaded axle. Adjustment – 8”. Approximately: 4” long x 8” wide x 20” high. Used with Model 283-N and Mode...
$429.68  $343.74
2863A Live End Pulley2863A Live End Pulley
Painted steel construction equipped with two ball-bearing equipped 8” diameter nylatron wheels. Pulley width: 8-1/4". Used with Model 283-N and Model 283-R. Weight: 1 - 6 lbs.
$318.01  $254.41
2864A Dead End Pulley2864A Dead End Pulley
Painted steel construction with single 8” diameter ball-bearing equipped nylatron wheel. Pulley width: 10". Used with Model 283-N and Model 283-R. Weight: 1-5 lbs.
$210.72  $168.58
2864A45 Dead End Pulley 45 Degree Angle2864A45 Dead End Pulley 45 Degree Angle
Used when track systems need to fit in narrow ceiling pockets or when 2 track systems need to be placed closely side by side. Used with Model 2863A Live End Pulley. Painted steel construction wit...
$242.33  $193.86
2830 Cord2830 Cord
Synthetic center and stretch resistant. For manually operated Model 283-N and Model 283-R tracks. 1/2” (No. 16) Weight: 100’ - 6 lbs. 2 oz.
$2.10  $1.68
3529 Cable3529 Cable
Wire center with woven polyester cover. Available on 500 ft and 1000 ft spools. Used with drum-drive curtain machines and most In-Line curtain machines. 3/16” (No. 6) Color: Black. Weight: 100’...
$0.93  $0.74
2829 Cable2829 Cable
Wire center coated operating cord. Commonly used with machine operated track systems, but since it does not stretch it is also often used on heavy hand operated systems. 1/4” (No. 8) Color: Maroo...
$1.21  $0.97
2834 Back Pack Guide® (Optional)2834 Back Pack Guide® (Optional)
This model is for machine operated tracks only. Prevents curtain from accumulating until track ends are reached. Thickness 1/8” Weight: 1 – 1 oz. Available in black finish at additional cost ...
$5.90  $4.72
2833A Back Pack Guide® (Optional)2833A Back Pack Guide® (Optional)
Used with Model 283-N and Model 283-R manually operated tracks. Hole sized for No. 2830 Cord. Thickness 1/8” Weight: 1 – 1 oz. Available in black finish at additional cost (No. 2833-ABL).
$5.80  $4.64
2821 Pocket Mounting Bracket2821 Pocket Mounting Bracket
Steel offset bracket for mounting Model 2800 track to side of ceiling pocket. Projects track approximately 4 1/2" from side of pocket. Must be used with Model 2808 Hanging Clamp (not included). ...
$27.06  $21.65
2822 Pocket Mounting Bracket2822 Pocket Mounting Bracket
Steel offset bracket for mounting Model 2800 track to side of ceiling pocket. Projects track approximately 2" from side of pocket. Must be used with Model 2808 Hanging Clamp (not included). Pla...
$25.34  $20.27
2823 Ceiling Bracket2823 Ceiling Bracket
Ceiling Bracket used when it is not possible to drill through track and attach directly to ceiling. Approximately: 5-1/4” long x 2” wide x 2-3/4” high. Weight: 1 - 13 oz.
$34.86  $27.89
2827A Rubber Spacer2827A Rubber Spacer
Used with Nos. 2849, 2850, 2851, and 2852 carriers to provide quieter operation. Used with Model 283-N and Model 283-R tracks. 5/8” hole. Weight: 10 - 1 oz.
$0.46  $0.37
2803F Flying Live End Pulley2803F Flying Live End Pulley
Used with flying type curtain machines to route the cable 180 degrees, back over the track to the track-attached machine. Extends beyond track approximately 4". Weight: 1 – 4 lbs. 13 oz.
$386.01  $308.81
2803B Center Take Off Pulley2803B Center Take Off Pulley
Used to route the operating cables perpendicular to the track. Must be located a minimum of 4’ from the end of the track. Add 1 each 2804 Dead End Pulley to system when this device is used. Extends...
$358.24  $286.59
2814 Pipe Clamp2814 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 13 oz. Available in black finish at additional cost (No. 2814BL).
$12.17  $9.74
2815 Pipe Clamp2815 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 16 oz. Available in black finish at additional cost (No. 2815BL).
$12.94  $10.35
2816 Pipe Clamp2816 Pipe Clamp
For 2” I.D. Schedule 40 pipe Weight: 1 pr. - 18 oz. Available in black finish at additional cost (No. 2816BL).
$15.89  $12.71
2840 Masking/Panel Master Carrier2840 Masking/Panel Master Carrier
For side-masking or panel moving tracks. Steel plate is attached to masking or panel frame. Constructed of painted steel and equipped with 4 nylon-tired ball-bearing wheels and 2 cord/cable conne...
$268.54  $214.83
2861 Door Carrier2861 Door Carrier
Constructed of 4 nylon-tired ball-bearing wheels mounted to plated steel body. Adjustable design permits leveling of door height without removing door from carrier. Rated for 100 pound load on pr...
$379.84  $303.87
6505 HERCULES® curtain machine. 3/4 H.P.6505 HERCULES® curtain machine. 3/4 H.P.
No. 6505 is a heavy duty draw curtain machine designed to operate long heavy weight curtains. Machine includes an 8" diameter x 12" wide helical grooved cable drum grooved for 3/16 wire center cabl...
$5,921.20  $4,736.96
7005 HERCULES® curtain machine. 1 H.P.7005 HERCULES® curtain machine. 1 H.P.
Draw curtain machine Model 7005 combines versatility with the power and drum capacity needed to operate larger and heavier than normal draw curtains. Designed for multiple remote locations and con...
$6,460.47  $5,168.38
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated threaded rod. The bracket is fabricated from hardened steel and has centered hole designed to accept 1?2" threaded rod. T...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
Universal wall mounting brackets for all ADC track systems. This bracket allows you to mount any of our tracks, either in a bi-part or one-way draw configuration, to a wall. The brackets are provi...
$70.65  $60.05
1483INV Inverted wall brackets1483INV Inverted wall brackets
Inverted wall mount brackets provide the same benefits as the 1483UNI brackets, but allow the tracks to tbe mounted closer to the ceiling and are hidden from view when the curtain is closed. A top...
$62.07  $52.76
2808ID Hanging Clamp with Cord Support2808ID Hanging Clamp with Cord Support
2808ID is an idler pulley device. Used to support and help prevent the cord or cable from sagging below the track sight line. Available for bi-part and one-way applications. Suggested spacing 6'. ...
$48.97  $39.18
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business