products » track-rigging » tripl-i-trac-420-series-track » model-422-422-r-curtain-track »

Model 422 & 422-R Curtain Track

ADC Model 422 curtain track system is used for walk-along applications where the operator walks the curtain open and closed, and can be used for stage and TV studio cyclorama installations where there is a need for a more robust or sturdier I-Beam type track.
No cables, cords, or pulleys are used with this type of system. The track can be curved in the field with the use of a Bending Tool, or at the factory to a minimum radius of 2' (layout dependent).
ADC Model 422-R curtain track system is identical to ADC Model 142 track, except that No. 4237 Single Carriers and No. 4253 Master Carriers are used.

When ordering, advise whether the track is to be ceiling-mounted, suspended or wall mounted.

Also available with a black finish at additional cost (ADC 542 / ADC 542-R).

Model 422 & 422-R Curtain Track

Please click on the links below to see the parts and components related to these tracks.

Model 422 & 422-R Curtain Track Parts:

4200 Curtain Track Channel4200 Curtain Track Channel
Double I-Beam type curtain track channel made from 7 gauge extruded aluminum, mill-finish. Obtainable in unspliced lengths up to 20'. Curved on-the-job or at the factory (optional) to a 2’ minimum...
$21.25  $17.00
4201 Single Carrier4201 Single Carrier
Carrier spacing: 12". Plated steel block supported from 2 nylon-tired ball-bearing wheels. Snap-on nylon spacers reduce noise and friction. Width: Approximately 1-3/8". Weight: 1 - 4 oz. Availab...
$16.13  $12.90
4252 Walk-Along Master Carrier4252 Walk-Along Master Carrier
Used with Models 422 and 142 tracks. Pivoting block assembly constructed of plated steel supported from 4 nylon tired ball-bearing wheels. Snap-on nylon spacers reduce noise and friction. Carrie...
$54.14  $43.31
4224 Splicing Clamp4224 Splicing Clamp
Two piece + assembly fasteners. Lock plate for joining track sections assuring proper vertical and horizontal track alignment. Track must be straight at splices. Approximately: 8-1/4" long x 1" wi...
$10.15  $8.12
4208 Hanging Clamp4208 Hanging Clamp
Recommended spacing: 4' with additional units at curves and in stack areas. Pipe batten recommended for suspended curved tracks. Sold in pairs. Weight: 1 pr. - 2-1/2 oz. Available in black fini...
$3.23  $2.58
1407A Lap Clamp1407A Lap Clamp
For use with continuously curved track systems. Provides wider track spacing in the overlap. Approximately: 6" wide x 1-1/2" long x 3/8" deep. Weight: 1 – 7 oz.
$23.85  $19.08
4209 End Stop4209 End Stop
Identical to 4208 except installed in inverted position at bottom of channel. Used with track Models 142 & 142-R. Weight: 1pr – 2 oz. Available in black finish at additional cost (No. 4209BL). ...
$3.23  $2.58
1408A Threaded Rod Hanger1408A Threaded Rod Hanger
Used with Model 4208 Hanging Clamp (not included). Provides a 3/8" hole parallel with the ceiling (perpendicular to the mounting hole of the 4208). Approximately: 1-1/4" x 1-3/4" x 2-3/8". For us...
$4.00  $3.20
1483 Double Track Wall Bracket1483 Double Track Wall Bracket
Used to mount 2 tracks, parallel with each other, to side walls. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Projection of track closest t...
$99.39  $79.51
1482 Double Track Hanger1482 Double Track Hanger
Used to mount 2 tracks, parallel with each other when the tracks are suspended. Standard track separation is 6" center to center (NOTE: fabric will rub if 2 stacked curtains pass). Painted steel...
$32.26  $25.81
4223A Ceiling Clamp4223A Ceiling Clamp
Used to attach track directly to overhead structure. Recommended spacing 5’ with additional units in curve and stack areas. Approximately: 3-1/4" wide x 1-1/2" long x 3/16" high. Weight: 1 – 6 oz...
$14.67  $11.74
4207 Lap Clamp4207 Lap Clamp
For securing double-sectioned track at center overlap. Used with track systems that are straight at the overlap. Note: 2 required. Weight: 1 – 6 oz. Available in black finish at additional cost...
$28.60  $22.88
1713 Pipe Clamp1713 Pipe Clamp
For 1” I.D. Schedule 40 pipe Weight: 1 pr. - 5.5 oz. Available in black finish at additional cost (No. 1713BL).
$10.27  $8.22
1714 Pipe Clamp1714 Pipe Clamp
For 1-1/4” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1714BL).
$10.85  $8.68
1715 Pipe Clamp1715 Pipe Clamp
For 1-1/2” I.D. Schedule 40 pipe Weight: 1 pr. - 7 oz. Available in black finish at additional cost (No. 1715BL).
$11.88  $9.50
BT1 Bending ToolBT1 Bending Tool
BT-1 I-beam track bending tool for use with Models 1300, 1400 & 4200 tracks. Approximate dimensions: 48" long x 15" wide x 9" high. Weight: 1 - 19 lbs. 4 oz.
$446.84  $357.47
1478 Suspension Strap1478 Suspension Strap
Used with Model 4208 Hanging Clamp (not included) and pipe clamp (also not included) to attach track to parallel overhead pipe batten. Strap length 4". Weight: 1 – 2 oz. Available in black fin...
$14.07  $11.26
1478A Suspension Strap w/pipe clamp1478A Suspension Strap w/pipe clamp
Used with Model 4208 or 1308 hanging clamp (not included) to attach track to parallel overhead 1 1/2 pipe batten. Strap length 6" from bottom of pipe. Weight: 1 pr. – 2 oz. Available in black f...
$21.24  $16.99
1481 Twist Strap1481 Twist Strap
Used with Model 4208 hanging clamp (not included) and pipe clamp (also not included) to attach track to perpendicular overhead pipe batten. Strap length 4” Weight: 1 – 2 oz. Available in blac...
$21.54  $17.23
1481A Twist Strap1481A Twist Strap
Used with Model 4208 hanging clamp (not included) to attach track to perpendicular overhead pipe batten. Strap length 6" from bottom of pipe. Weight: 1 – 2 oz. Available in black finish at add...
$28.58  $22.86
4251 Scenery Carrier4251 Scenery Carrier
Used to traverse medium weight scenery panels. Normally used in pairs on a single panel. Maximum panel weight (2 carriers per panel) is 30 pounds. Approximately: 4-3/8" long x 4-7/8" high x 1-1/2...
$297.77  $238.22
14 Rotodraper® Pivot Device14 Rotodraper® Pivot Device
Used with 1400 and 4200 track. Brackets formed of 11 gauge steel. Can support 75 lbs. maximum weight. Two Pipe Clamps supplied (clamps for 1" pipe standard). Two No. 400-C Clamps provided for con...
$247.44  $197.95
14A Rotodraper® Pivot Device14A Rotodraper® Pivot Device
1 - 4-1/2 lbs. Used with 1400 and 4200 track. Essentially same as Model 14 except includes ball-type locking device which provides precise 15 degree settings of rotation. Brackets formed of 11 gau...
$317.54  $254.03
TC1 Trim Chain (3 links)TC1 Trim Chain (3 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Three links provide 3” of curtain height adjustment on carriers where chain is not normally supplied. Other...
$1.27  $1.02
TC2 Trim Chain (5 links)TC2 Trim Chain (5 links)
Trim chain is used for leveling purposes between the carrier and the top of the curtain. Five links provide 5” of curtain height adjustment on carriers where chain is not normally supplied. Other ...
$1.54  $1.23
THREADR Hanging Bracket for threaded rodTHREADR Hanging Bracket for threaded rod
Designed to allow suspension of our various track models from tensile rated threaded rod. The bracket is fabricated from hardened steel and has centered hole designed to accept 1?2" threaded rod. T...
$38.54  $30.83
1483UNI Wall Bracket Multi-Track Use1483UNI Wall Bracket Multi-Track Use
New ADC curtain track wall bracket which can be used to wall mount the entire line of ADC curtain track systems. A slotted mounting surface allows the tracks to be easily adjusted from 4" to 12" f...
$70.65  $60.05
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!

Credit Cards Welcome
We welcome designers, decorators, production companies, window covering and school equipment companies among other suppliers!!
LAUSD Safety Prequalified
LAUSD Safety Prequalified
California Certified Small Business
California Certified
Small Business